Drivers Seatback Cover

Anything Goes (within reason)

Moderators: FAOA Administrators, FAOA Moderators

Post Reply
rlafash
Posts: 11
Joined: Fri May 22, 2015 3:25 pm
Location: Wilmington, DE

Drivers Seatback Cover

Post by rlafash » Sun Mar 06, 2016 11:55 am

Any instructions/advice on removing the drivers side seatback cover from my 2002 Firehawk? The center panel needs to be replaced..

CARiD
Posts: 2
Joined: Tue Apr 19, 2016 4:32 am

Re: Drivers Seatback Cover

Post by CARiD » Tue Apr 26, 2016 6:22 am

For each of the lower seat cushions, there is a single bolt right under the lower/front edge of the cushion, right in the center. The bolt is horizontal and easy to access with a ratchet, extension and socket.
The pivot/hinge at the bottom of each side of the seatback unbolts from the sides of the inner chassis. There are two studs for the pivot to attach to, with nuts that you remove, then lift the seatback off the studs.
In case you need any interior repair parts for your Firehawk, check them out here: http://www.carid.com/2002-pontiac-fireb ... ior-parts/

Post Reply