For Sale - 2001 Trans Am Firehawk

Got something to sell (car related, please)? List it here!

Moderators: FAOA Administrators, FAOA Moderators

Post Reply
CDN01HAWK
Posts: 1
Joined: Wed Aug 14, 2013 10:06 pm

For Sale - 2001 Trans Am Firehawk

Post by CDN01HAWK » Tue Aug 20, 2013 12:16 pm

2001 SLP Trans Am Firehawk
Red with Black Interior
Original Owner
SLP Chrome Wheels
SLP Floor Mats
SLP Car Cover
T-Top Car
6-Speed
29,000 km (18,000 miles)
Over $55,000 invested in the car in the last 3 years and the car has been driven less than 1,600 km (1000 miles) in the last 3 years.
663 horsepower, 579 lb-ft of torque – normally aspirated 417 cid LS3 stroker built by Tony Mamo – Head of Research & Development at Air Flow Research (AFR)
Dyno tested at Westech Performance Group in Mira Loma, California.
Engine build featured in Winter 2010 Engine Masters Magazine. Cover and Main feature (9 page article)
1st production set of AFR V2 230cc Cylinder Heads - ported by Tony Mamo
Cometic .045 head gaskest
Custom Wiseco forged pistons, GFx ring pack
Callies Compstar Crank, 2.000 inch journals
Callies Compstar H-beam rods
Comp Cams custom grind 243/247@.50, 624 lift intake and exhaust on a 114 degree lobe separation
Lunati “High-RPM”, link-bar style hydraulic lifters
Manton 11/32, .125" inch wall custom length intake/exhaust pushrods
Yella Terra 1.7 rocker arms
AFR 8019 springs with titanium retainers
ARP fasteners throughout
ATI Damper
FAST LSXR 102mm Intake – ported by Tony Mamo
FAST fuel rails
36 lb. flow matched injectors
Nick Williams 102mm Throttle Body
FAST Toys 104mm Air Lid
Lingenfelter (LPE) 100mm MAF
MSD Wires
Meziere Electric Water Pump
NRG Motor mounts
RPS Twin Lite Clutch
B&M Ripper Shifter
Tick Performance Master Cylinder
American Racing 1 7/8” headers w/high flow cats, 3” collectors and 3 1/2 “ custom y-pipe
3 ½” Stainless Works catback with dual Corsa 3” polished tips
Custom Baer “Firehawk” Brakes with drilled and slotted rotors, six piston calipers
Complete BMR suspension including front K-member, control arms and springs, panhard bar
Spohn Torque Arm
Strange Engineering Billet adjustable shocks
Lonnies Performance twin fuel pump system
Rear rims widened to 17x11” by Weldcraft in Livonia, Michigan. Inner quarter panels modified to fit rims with no rubbing and within stock wheel wells
315/35/17 Mickey Thompson Drag Radials rear
Moser 12 bolt differential (powder coated)
Harlan Shift Light (hidden installation)
All installation and tuning performed by Brian Wall – owner of Walls Rod and Custom in Dufrense, Manitoba (just outside of Winnipeg)

Also includes:
Corsa 3” Catback with Single 3” Stainless Works polished tips
Original SLP dual/dual catback
Original LS1 heads, cam and lifters
Original discs, calipers and pads
Original Air Lid
SLP Air Lid
Original Hurst Shifter
Original Floor Mats


This is a car for a very specific buyer that is looking for a highly modified Firehawk which is truly in like new condition (never even had windshield washer fluid added to it) and has had no expense spared and only the best parts available put into it. $50,000 CDN obo
Pictures and Engine Masters article can be sent by email.

Post Reply