96 SS part out?

LTX_OUTLAW · Post by **LTX_OUTLAW** » Sat Sep 28, 2013 9:23 am

Hey guys I been in contact with this seller about his 96 SS part out

http://www.camaroz28.com/forums/parts-s ... ut-875674/

he has a lot of stuff I been looking for a while but I was wondering about the front and rear sway bar sizes that were used on the 96-97 SS and WS6? From the posting he says the car had lev 2 springs, bilstien shocks and struts and a bunch more great parts if anyone can confirm the size sway bars used or any additional info about the 96-97 SS and WS6 suspension packages it would be helpful and thx

lakeratiam · Post by **lakeratiam** » Sat Sep 28, 2013 3:17 pm

Unless it is a 1LE car....probably 32mm up front and 19mm in the rear (at least as far as the WS6 goes).

LTX_OUTLAW · Post by **LTX_OUTLAW** » Sat Sep 28, 2013 10:03 pm

A while back I remember reading that it is important for the springs and sway bars to work with each other so do you think the stock sway bars in my 93 formula will work well with the lev 2 springs???

LTX_OUTLAW · Post by **LTX_OUTLAW** » Sun Sep 29, 2013 9:06 pm

Well I got all of the parts I been waiting for but I was trying to get some help confirming these p/n's

front springs 22077195
rear springs 22077420

the seller said these were the lev2 springs and help finding these p/n's would be helpful thx

96AZHAWK · Post by **96AZHAWK** » Fri Oct 04, 2013 11:25 am

LTX_OUTLAW wrote:Well I got all of the parts I been waiting for but I was trying to get some help confirming these p/n's

front springs 22077195
rear springs 22077420

the seller said these were the lev2 springs and help finding these p/n's would be helpful thx

Level 2 springs (the ones that come with the bilstein shock setup)... as far as all the sets I have seen... actually say SLP and Eibach on them.

lakeratiam · Post by **lakeratiam** » Fri Oct 04, 2013 5:24 pm

Check this out.........http://www.ebay.com/itm/SLP-720783798-S ... c0&vxp=mtr

and this.....http://www.ebay.com/itm/SLP-720782798-S ... 6e&vxp=mtr

and this...............http://www.ebay.com/itm/1993-02-Camaro- ... 0d&vxp=mtr

And yes they will work with the stock bars, but would be better with 35mm front and 21mm rear along with the Bilstien shocks.

I have a new set up like the last link posted that have never been installed....when I get a chance I will dig them out and see what #'s are on them.....

Also, I think some of the Firehawks came with the 21mm rear bar and not the WS6 and, some of the SS Camaros had a 23mm rear bar.

96 SS part out?

96 SS part out?

Re: 96 SS part out?

Re: 96 SS part out?

Re: 96 SS part out?

Re: 96 SS part out?

Re: 96 SS part out?