Board index
The Official Firehawk Message Board
It is currently Thu Jun 22, 2017 7:56 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Tue Aug 04, 2015 7:48 pm 
Offline

Joined: Mon Sep 28, 2009 5:24 pm
Posts: 22
Hey, My 2002 Firehawk (#0808) makes some noises like the shocks, or shock plate is busted. There seems to be a couple of different Bilstein shocks out there. Can someone assist me in buying the correct replacement shocks (part number)? I want to replace the entire shock assembly. Front and back. Plus it would be nice if I could raise the car up an inch. I'm not sure that is possible. It bottoms out going over practically anything. Thanks!!!!!


Top
 Profile  
 
PostPosted: Wed Aug 05, 2015 9:04 am 
Offline

Joined: Mon Sep 28, 2009 5:24 pm
Posts: 22
SLP website has part #70002 as the correct ones.

It states: "This new package combines our #70008 Bilstein shocks and #70009 Eibach springs to create The Ultimate Dual-Purpose Suspension Upgrade for 1993-2002 F-Bodies. Custom designed to SLP's specifications by their respective manufacturers, these pieces fuse race-quality responsiveness at the track with a firm but comfortable ride in everyday use. Best of all, you'll save more than $20 over the cost of buying the parts individually. "

Are these what you recommend? Thanks!!


Top
 Profile  
 
PostPosted: Wed Aug 05, 2015 12:43 pm 
Offline

Joined: Sat Oct 05, 2013 10:26 pm
Posts: 16
I installed the SLP SLP #70002 set with the #70008 shocks and #70009 springs on my FIrehawk last year. The car sits slightly lower than stock, probably just 0.25" lower. I have no problems with bottoming out on regular roads and my car clears speed bumps with no problem.

The set is as close as you can get to a replacement set for the bilstein suspension upgrade. The springs are not the same as what was used originally and it is not known if the shocks are re-valved. There is no answer to the question if there is any difference between the Bilsteins HD and SLP Bilstein's. Rousch purchased SLP a few years back and it is not known if they still re-valve the front bilstein shocks.


Top
 Profile  
 
PostPosted: Fri Oct 16, 2015 5:45 pm 
Offline

Joined: Tue Oct 23, 2007 5:15 pm
Posts: 80
I was wondering the same thing as I plan to keep my car long term. the_dragon did you have the bilstein package originally installed on your car and it is even lower with the replacements? My original eibach springs are blue(2002 w/bilstein package)
I thought about ordering a set of springs and shocks for back up down the road should I need them.
Does Bilstein rebuild these shocks? At one time I saw they could rebuild and restore some of their shocks.
Any further insight would be great.
Thanks
Justin


Top
 Profile  
 
PostPosted: Fri Oct 16, 2015 7:46 pm 
Offline
User avatar

Joined: Wed Jan 05, 2005 3:59 pm
Posts: 2586
Location: The Empire State
The OEM Bilstein's are not rebuildable. Only ones that are , are their high end racing serieses . if you open to other options there are other manufacturers who have suspension kits. When I get a Hawk again I'm going adjustable

_________________
-Bryan, 10TH #005


Top
 Profile  
 
PostPosted: Mon Oct 19, 2015 2:24 am 
Offline

Joined: Sun Sep 21, 2014 10:37 pm
Posts: 13
Location: Fayetteville, Ar
I got all of my suspension parts from Strano parts, bilstiens, springs, sway bars, couldn't be happier with the way it looks and handles. The sp41 springs do set it lower but not as much as eibach.

_________________
[url] www.fquick.com/Whitehawkdown
[/url]97 vert LS1 conversion A4
"Built it myself" -Bryan-
SLP bilstein shock/struts, Strano springs, 1 3/8 and 7/8 swaybars, LTs, OYP, Corsa Cat-back, Racetronix fuel pump, SLP fan switch, LS1 front/rear brakes


Top
 Profile  
 
PostPosted: Sat Oct 24, 2015 2:04 am 
Offline

Joined: Sat Dec 28, 2013 6:19 pm
Posts: 289
Same here from Strano except for the shocks. I went with Konis.


Top
 Profile  
 
PostPosted: Sat Oct 24, 2015 8:23 am 
Offline

Joined: Tue Oct 23, 2007 5:15 pm
Posts: 80
Thanks guys. My car is completely stock and I'm wanting to preserve the originality so my focus would be to have them look like the SLP installed bilsteins and function as designed with the Eibach springs.
Justin


Top
 Profile  
 
PostPosted: Sat Oct 24, 2015 7:36 pm 
Offline
User avatar

Joined: Wed Jan 05, 2005 3:59 pm
Posts: 2586
Location: The Empire State
http://www.slponline.com/category/Camar ... nents.html

_________________
-Bryan, 10TH #005


Top
 Profile  
 
PostPosted: Tue Oct 27, 2015 10:40 am 
Offline

Joined: Tue Oct 23, 2007 5:15 pm
Posts: 80
what is the difference between the "level 2" suspension the only goes up to 2000 model vs the Bilstein package model #70002?
http://www.slponline.com/product/70002- ... ystem.html

My car is 2002 #171.
Thanks
Justin


Top
 Profile  
 
PostPosted: Wed Oct 28, 2015 8:06 am 
Offline
User avatar

Joined: Wed Jan 05, 2005 3:59 pm
Posts: 2586
Location: The Empire State
The differance is Valving... I don't if its stiffer or softer

_________________
-Bryan, 10TH #005


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group