Okay ladies and gentlemen. I replaced the shocks and the springs on my 02 Firehawk and there is still a lot of squeak in the ride when pulling out of my incline driveway and and going over speed bumps etc.
Any ideas and suggestions are more than welcome. Also would you do Fast LSXR 102 mm intake or headers first.
Thank you
Squeaky Ride
Moderators: FAOA Administrators, FAOA Moderators
- BLACK-HAWK
- Posts: 2703
- Joined: Wed Jan 05, 2005 2:59 pm
- Location: Somewhere in New Mexico
- Contact:
Re: Squeaky Ride
Sway bar bushings more then likely is my guess. Cheap way to find out, remove sway bar bushings , lube them with grease , and reinstall. If the squeezing goes away then you'll know its the bushings
2001#194 (Unicorn)
-
- Posts: 289
- Joined: Sat Dec 28, 2013 5:19 pm
Re: Squeaky Ride
Could also be lower control arm bushings. If yours have fittings, grease 'em.
- Scott Chab
- Posts: 3309
- Joined: Sat Feb 23, 2002 3:44 pm
- Location: Wilmington, Delaware
Re: Squeaky Ride
What he said. May '02 had that issue. removed and lubed and no more squeekBLACK-HAWK wrote:Sway bar bushings more then likely is my guess. Cheap way to find out, remove sway bar bushings , lube them with grease , and reinstall. If the squeezing goes away then you'll know its the bushings
Mac Logan
1992 Firehawk #05
1995 Firehawk #C04
2018 Mercedes-Benz C300 Wagon
Proud Member - Firehawk Association of America
Author of Firehawk - Fiercest of the Firebirds
1992 Firehawk #05
1995 Firehawk #C04
2018 Mercedes-Benz C300 Wagon
Proud Member - Firehawk Association of America
Author of Firehawk - Fiercest of the Firebirds